More and more people choose to buy a treadmill. They can exercise at any time at home. The treadmill at home is broken. I don't know where the problem is. Let's share the fitness equipment manufacturers.

1. The electric treadmill doesn't accelerate



Causes: 1. The instrument panel is damaged; 2. The sensor is broken; 3. The drive board is broken.



Solutions: 1. Replace the instrument panel; 2. Replace the sensor; 3. Replace the drive board.



2. The running belt of the treadmill slips
Reasons: 1. The running belt is too loose; 2. The multi groove belt of the treadmill is too loose.
Solutions: 1. Adjust the balance bolt at the back end of the running belt (rotate it clockwise until it is reasonable); 2. Adjust the fixed position of the motor.

3. The treadmill stops automatically
Solutions: 1. Please check the circuit carefully; 2. Check the wiring; 3. Replace the drive board.
Causes: 1. The circuit is short circuited; 2. There is a problem with the internal wiring; 3. There is a problem with the drive board.

4. There is a noise during exercise
Possible reasons: 1. The space between the cover and the running belt is too small, which leads to friction between the cover and the running belt; 2. It may be due to the foreign matter rolled in between the running belt and the running board during the exercise; 3. The running belt deviates seriously, causing friction with both sides of the running board; 4. Motor noise
Solutions: 1. Correct or replace the cover; 2. Remove foreign matters; 3. Adjust and balance the running belt; 4. Replace the motor. 5. Why can't the treadmill start?
Possible reasons: 1. The power supply is blocked; 2. The fuse is blown; 3. The switch of the electric treadmill is broken; 4. For other reasons, please contact our professionals.
Solutions: 1. Please check the power supply; 2. Replace the fuse; 3. Replace the power switch.
Treadmill maintenance, common faults and solutions of treadmill (2)

6. The running belt of treadmill deviates
Possible reasons: 1. Imbalance between the front axle and the rear axle of the treadmill; 2. Because the running posture is not very standard, the strength of the left and right feet is uneven, leading to the deviation of the belt.
Solution: adjust the balance of the roller.

7. Electric treadmill motor noise when moving
Possible reasons: 1. The carbon brush may be seriously worn; 2. When the motor is running, it rubs to the object nearby. Solutions: 1. Check or replace carbon brush; 2. Remove foreign matters.

8. The possible reasons are: 1. The three-phase plug is not inserted in place; 2. The wiring inside the switch is loose; 3. The three-phase plug is damaged; 4. The switch may be damaged;
Solutions: 1. Try several times more; 2. Open the upper shield to check whether the wiring is loose; 3. Replace the three-phase plug; 4. Replace the switch.

9.The key doesn't work
Possible reasons: 1. The key is aging; 2. The circuit board of the key becomes loose;
Solutions: 1. Replace the key; 2. Lock the key circuit board.

10. Incomplete display
Possible causes: 1. Poor contact of LCD; 2. Aging of LCD;
Solutions: 1. Lock the fixing screws of the circuit board; 2. Replace the electronic meter.

11. The display flashes
Possible causes: 1. Poor contact of control line; 2. Electrostatic interference;
Solutions: 1. Connect the control line; 2. The ground wire is not well connected. 12. I don't feel comfortable running
Possible reasons: 1. Check whether the running belt is too loose; 2. Check whether the multi groove belt is too loose;
Solutions: 1. Adjust according to the instructions in the instruction manual; 2. Adjust the speed to the lowest, step on the running belt with foot force, observe the tightness of the multi groove belt, and adjust the front roller; 3. Add lubricating oil to the running board to lubricate the running board.
Treadmill maintenance, common faults and solutions of treadmill (3)

13. After using for a period of time, I feel that the vibration is getting bigger and bigger
Possible causes: 1. Check the groove of the multi groove belt; 2. Check whether the vibration is generated by the motor; 3. Check whether the front and rear drum wheels rotate abnormally;
Solutions: 1. Remove the debris; 2. Replace it; 3. Replace the drum.

15. After using for a period of time, there are abnormal sounds
Possible causes: 1. Check whether the front and rear roller cultivation is damaged; 2. Check whether the carbon brush of the motor is worn unevenly; 3. Check whether the fixing screw of the cover is loose; 4. The belt pulley touches the speed sensor; 5. Foreign matters run into the inner layer of the running belt; 4;
Solutions: 1. Replace the roller; 2. Replace the carbon brush; 3. Tighten the fixing screw; 4. Adjust the speed sensor to the appropriate position; 5. Remove the foreign matters.

16. The machine produces peculiar smell or smoke
Possible causes: 1. Open the protective cover to check whether there is a short circuit in the connecting wires; 2. Check whether the current continuously exceeds the rated value after the motor is loaded;
Solutions: 1. Replace the wiring; 2. Replace the motor if the current exceeds the rated value; 3. Add lubricating oil to the running board regularly (at least monthly), once every seven days for household use.

17. The electronic watch has no action button
Possible causes: 1. Check whether the safety switch pops off and is not on the electronic meter; 2. The connection line is not connected properly;
Solutions: 1. Press down the safety switch; 2. Connect the cable; 3. Replace the electronic meter.

18. Unable to accelerate or decelerate
Possible causes: 1. Check whether the connector of the connecting cable is not in good contact; 2. Check whether the internal key cable of the electronic meter is broken or broken; 3. The electronic watch is poor; 4. The motor control board is poor;
Solutions: 1. Replace the wiring; 2. Replace the electronic meter; 3. Replace the control panel.

19. Electronic watch key failure
Possible causes: 1. Check whether there is any breakage, breakage or falling off of the key wire in the electronic watch or the floor of the electronic watch is not locked properly;
Solutions: 1. Open the electronic watch and lock the fixing screw of the electronic board of the key; 2. Replace the electronic watch.
Note: different types of treadmill, the processing method is not the same